Tuesday, August 6, 2019
Wireless Led Dot Matrix Notice Board Essay Example for Free
Wireless Led Dot Matrix Notice Board Essay POWER SUPPLY Power supply section power the whole circuitry. Different section of this system requires different voltage levels. This requirement cannot be achieved using a single power adapter or battery. So a power supply consist of dc-dc converter is used in our project. The DC-DC converted dc power supply can provide 12v dc, 9v dc and 5 v dc simultaneously for display, discrete IC and micro controller respectively. The power supply section is also included with short circuit protection to prevent system being damaged due to the careless usage or electrical malfunctions. CONTROLLER The controller used here is PIC 16f877a, which is an 8 bit micro controller used for general purpose medium scale applications. In our project this device retrieves signals from the RF receiver as serial data through its URAT port on a baud rate of 2400 bps and stores in its internal data memory. From there it sends the data one by one to display section to display it. The scrolling algorithm is also done through the program written in the controller. This controller also communicate with the RFID reader to fetch the ID of RFID card brought to its proximity and then retrieves the corresponding registry entry to display it in the display board. The scrolling message mode and personal message mode is switched with help of two way switch attached in the display board end. When the switch is in its normal position the message from the PC is displayed and when the switch is in other position the board will display the personal information of theà student whose card is in the proximity o f the RFID reader. DISPLAY The display used here are dot matrix LED. The whole panel consist of 32 displays each one of 57 dot matrix LED. Each character in this display is formed using four such display units. That means the whole display can show a total of 8 characters at a time. The display is drived and controlled using a ring counter IC 4017. By this IC we select each display independently and their column. It uses persistence of vision to let you drive the 32 led matrixes with only 10 microcontroller outputs! Normally you would need 32outputs for 32 LEDs but by using multiplexing and a helper chip you can get away with 10. LED Display multiplexing simply means turning on one led for a short period of time and doing this repeatedly for each LED. If you do this fast enough then your eye will not notice any flicker.The LEDs are no different to any other LEDs but it saves a huge amount of soldering as all the wiring has been done for you..Or you could wire it up yourself if you cant get hold of the module. Still only need 10 control wires (just wire you leds the same as shown in the module diagram). Your eye reacts slowly to changes in light intensity so that if a light is turned on and off quickly enough then it does not notice that the light is off. Basically your eye remembers a light pulse for a short time. The approximate time is 20ms so if the light is turned on at a frequency 50Hz ( 1/20ms) then your eye will not notice any flicker at all. Multiplexing uses this fact to reduce the number of pins needed to drive an LED display. You can do this by splitting the 32led displays into 7 rows and 5columns which lets you drive it using 7 row outputs and 5 column outputs. In fact the 57 led matrix block used here has all the leds arranged in this way already. Each row is driven in turn and as long as all of the rows are driven within a time period of 20ms it will appear as though the LEDs are on continuously. To turn a specific led ON, data is output to the column drivers when a row is driven. To save more pins it is common to use a helper chip and in this project it is a Johnson counter (a 4017). This generates a walking one every time that its clocked.à Since you only want one row on at a time it is the ideal chip for this application. In this project when the 4017 has been reset it outputs logic high at Q0 which is not connected so during reset the 4017 does nothing. This allows you to use the column driver port for something else if you want to when you are not driving the LEDs.To drive the 4017 all you need is two pins one for reset and one for clock. So to fully drive the 32 matrix led display you need only 4 4017. The most difficult thing about using the dot matrix LED display is defining the characters. Basically for ASCII characters you need an array of 128 blocks each having 8 column data numbers. The usual way is to get out a piece of graph paper and define your characters by drawing blocks where a pixel is on. You then translate each line into hex (binary to hex is very easy) and then transfer this information to your program source code. RFID READER RFID is used here to implement the personal information display. RFID technique helps the system for identifying each student with the help of a unique ID given to each student. This reader is capable of powering and reading data from an RFID card which is brought ot its proximity. It has a transmission section through which it sends the received data to controller. The range of this RFID is approximately about 10 cm so that it can avoid unwanted detection of RF signals. In our system RFID system consists of a reader and one or more tags. The readers antenna is used to transmit radio frequency (RF) energy. Depending on the tag type, the energy is harvested by the tags antenna and used to power up the internal circuitry of the tag. The tag will then modulate the electromagnetic waves generated by the reader in order to transmit its data back to the reader. The reader receives the modulated waves and converts them into digital data. In the case of the Parallax RFID Reader Module, correctly received digital data is sent serially through the SOUT pin. There are two major types of tag technologies. Passive tags are tags that do not contain their own power source or transmitter. When radio waves from the reader reach the chipââ¬â¢s antenna, the energy is converted by the antenna into electricity that can power up the microchip in the tag (known as parasitic power). The tag is then able to send back any information stored on the tagà by reflecting the electromagnetic waves as described above. Active tags have their own power source and transmitter. The power source, usually a battery, is used to run the microchips circuitry and to broadcast a signal to a reader. Due to the fact that passive tags do not have their own transmitter and must reflect their signal to the reader, the reading distance is much shorter than with active tags. However, active tags are typically larger, more expensive, and require occasional service. The RFID Reader Module is designed specifically for low-frequency (125 kHz) passive tags. Frequency refers to the size of the radio waves used to communicate between the RFID system components. Just as you tune your radio to different frequencies in order to hear different radio stations, RFID tags and readers have to be tuned to the same frequency in order to communicate effectively. RFID systems typically use one of the following frequency ranges: low frequency (or LF, around 125 kHz), high frequency (or HF, around 13.56 MHz), ultra-high frequency (or UHF, around 868 and 928 MHz), or microwave (around 2.45 and 5.8 GHz). Here we are using an RFID Reader Module with a single TTL-level. The current consumption of the module will increase dramatically when the module is active. A visual indication of the state of the RFID Reader Module is given with the on-board LED. When the module is successfully powered-up and is in an idle state, the LED will be GREEN. When the module is in an active state and the antenna is transmitting, the LED will be RED. The face of the RFID tag should be held parallel to the front or back face of the antenna (where the majority of RF energy is focused). If the tag is held sideways (perpendicular to the antenna) youll either get no reading or a poor reading. Only one transponder tag should be held up to the antenna at any time. The use of multiple tags at one time will cause tag collisions and confuse the reader. The two tags available in the Parallax store have a read distance of approximately 3 inches. Actual distance may vary slightly depending on the size of the transponder tag and environmental conditions of the application. When a valid RFID transponder tag is placed within range of the activated reader, the unique ID will be transmitted as a 12-byte ASCII string via the TTL-level SOUT (Serial Output) pin in theà following format: RF RECEIVER The RF receiver is used to receive RF wireless signals which are transmitted fro the pc section and feed it to the controller. This receiver works in the principle of ASK modulation, an analogue modulation technique to implement digital transmission. This receiver has an active antenna. It works with power of 5V and sink a current of 0.1 mA. The maximum baud rate allowable with this receiver is 2400 bps. For efficient operation we uses 1200 bps. The range of this receiver is with in 100 mtrs. But it can be extended to kms be increasing the power of transmitter . PC SECTION PC section contains application software which is used to interface with the computer. This application has a text box where we can enter the message to be displayed in the notice board. On hitting the send button the data in the text box is transmitted to the display board wirelessly. RS 232 ââ¬â TTL CONVERTER The signal obtained from th PC is of RS 232 standard. Which means the signal from the PC will be in the range of +12 to -12V level. For the transmitter and the controller to understand the signal it should be in the range of 0 +5 V. so the signal should be level converted before transmission. For this level conversion we use MAX 232 IC. This IC is dedicated for RS 232 to TTL level conversion. With the help of some discrete components this IC can convers the level to ttl logic. RF TRANSMITTER RF transmitter transmits the digital signal generated by the level converter through space as electromagnetic waves. The transmitter uses ASK modulation technique. The range varies up to 100mtrs. The power varies from 5V to 12v. The more the power supply voltage the more will be its quality and range.
Monday, August 5, 2019
Zidovudine for the Prevention of HIV Transmission
Zidovudine for the Prevention of HIV Transmission Introduction Zidovudine is an antiretroviral drug which is a nucleoside reverse transcriptase inhibitor; it is used as treatment with other antiretroviral drugs against the Human Immunodeficiency Virus. Additionally, zidovudine can be utilised as a means of reducing the risk of transfer of HIV from a pregnant woman to her child. Furthermore, zidovudine is used in post exposure prophylaxis in order to lower the chance of being infected with HIV in people who have been exposed to the virus. (AHFS Drug Information, n.d.). Name Of Drug, Structure, Formula and Functional Groups Zidovudine is also known as azidothymidine and, in short, AZT (Joint Formulary Committee, 2010). The molecular formula of the compound is C10H13N5O4 (The Merck Index, n.d.) and zidovudine has a molecular weight of 267.25, as calculated using the ISIS ChemDraw package (Cambridge Soft, n.d.). Analysing the compound shows that zidovudine is made up of a thymine group bonded to a 2,3-dideoxyribose group with an attached azide group. Therefore the systematic name of zidovudine is 3â⬠²-azido-2, 3â⬠²-dideoxythymidine (The Merck Index, n.d.), as the oxygen of the hydroxyl group on the 3 carbon of the ribose ring has been removed, giving 3-deoxyribose, and has been replaced with an azide group and the oxygen on the 2 carbon has also been removed. The azide group on the ribose ring is the reason why zidovudine acts as a nucleoside reverse transcriptase inhibitor (AHFS Drug Information, n.d.). In order for zidovudine to carry out its role, it must be phosphorylated by an enzyme called thymidine kinase; this is due to the fact that reverse transcriptase includes the triphosphates produced into the HIV DNA chain being formed during HIV replication. Consequently, after the triphosphate has been included, 5, 3-phosphodiester bonding in the DNA chain is not possible, because of azide group in the triphosphate, and therefore DNA formation cannot continue (Foye et al, 2008). Formulations and Packaging The generic form of zidovudine is available as hard capsules (Electronic Medicines Compendium, n.d.) in two strengths of 100mg and 250mg (Joint Formulary Committee, 2010). Both strengths are packaged in foil blister packs and plastic bottles and need to be kept in these; they have an expiry date of 2 years from the date of manufacture (Electronic Medicines Compendium, n.d.). Zidovudine is also available under the brand name of Retrovirà ® in the form of capsules, oral solution and injection solution (Joint Formulary Committee, 2010). All of the Retrovirà ® formulations need to be kept below 30 degrees and in their original outer boxes (Electronic Medicines Compendium, n.d.). The capsules are hard capsules (Electronic Medicines Compendium, n.d.) in strengths of 100mg and 250mg (Joint Formulary Committee, 2010); they have an expiry date of five years from the date of manufacture and are packaged in a blister pack or a bottle (Electronic Medicines Compendium, n.d.). The oral solution consists of a 50mg in 5ml dose (Joint Formulary Committee, 2010) and is packaged in an amber bottle made of glass. The oral solution has an expiry date of two years from the date of manufacture but should be disposed of after the bottle has been opened for one month (Electronic Medicines Compendium, n.d.). The injection solution is available in the dose of 10mg per 1ml and is used for intravenous infusion (Joint Formulary Committee, 2010). It is packaged in a glass vial which is amber or clear in colour. The solution has an expiry date of three years after the date of manufacture however, once opened, it must be used straightaway and any remaining solution disposed of (Electronic Medicines Compendium, n.d.). According to Martindale: The Complete Drug Reference (n.d.), all the formulations of zidovudine need to be shielded from sources of light and need to be kept in air tight containers. Stereochemistry and Conformation As highlighted in the diagram drawn using ISIS ChemDraw (Cambridge Soft, n.d.), zidovudine has a total of three chiral centres and hence zidovudine has eight possible stereoisomers. The 1 carbon of the ribose ring is of the R configuration whereas the 3 and 4 carbons are of the S configuration (Novak et al, 2003). Zidovudine has a specific optical rotation value of +99à ° in water (Merck, n.d.) and hence rotates the plane of polarized light clockwise; consequently zidovudine is optically active (Freeman, 2010). Synthesis Zidovudine was made by Jerome Horwitz in 1964 (Weeks et al, 2010). It can be formed from thymidine, however, this is a costly method and therefore a more cost effective technique is used to make zidovudine on a large scale by using D-Mannitol as the starting compound (Saunders, 2000). The process has been drawn below using ISIS ChemDraw (Cambridge Soft, n.d.) with reference to Top Drugs (2000). In the first stage, a derivative of D-glyceraldehyde is formed from D-mannitol using acetone and a source of protons and refluxing. Lead (IV) acetate is then added. In the second stage a Wittig reaction is carried out and PH3P=CHCO2Et and methanol are added. In the third step hydrochloric acid is added, producing a lactone. In the fourth stage the lactone is protected and the azide group is added on through a Michael addition reaction. The reagents used to protect the lactone are t-Bu(Me)2SiCl, imidazole and dimethylformamide. The reagents for the Michael addition reaction are lithium azide, tetrahydrofuran, acetic acid and water. In the fifth stage the lactone is reduced to a lactol at minus 78 degrees using Diisobutylaluminium hydride and dichloromethane. The hydroxyl group is activated to form a sugar intermediate using acetic anhydride and pyridine. In the sixth step, Vorbruggen conditions are adopted and a condensation reaction is performed with the sugar intermediate and silyla ted thymine which produces alpha and beta anomers. The reagents are di-trimethylsilyl-thymine, trimethylsilyl trifluoromethanesulfonate and EDC. In the seventh step, the silyl protecting group is taken off and the anomers are uncombined to obtain zidovudine. The reagents used in this step are n-Bu4N+F- and tetrahydrofuran (Saunders, 2000). Drug stability: Potential sites of chemical instability and metabolism Zidovudine decomposes greatly in the presence of light because of the azide group and the product formed from the breakdown is thymine. This is because two nitrogen atoms are removed from the azide group, forming nitrene. An insertion reaction takes place and aziridine is made. Water, as a nucleophile, attacks aziridine. The amide anion formed causes the thymine group to be nucleophilically displaced and hence thymine is produced as the degradation product (Dunge et al, 2004). Therefore as zidovudine is mostly affected by light it is advised that the various formulations of zidovudine are kept away from light sources (British Pharmacopoeia, 2010). Zidovudine has a bioavailability of 63%. This is due to the fact that zidovudine undergoes glucuronidation, giving zidovudine glucuronide which is more water soluble than zidovudine due to a sugar group being added, and is renally excreted (Burton et al, 2006). UDP-glucuronyl transferease is the enzyme which catalyses the reaction (Veal et al, 1995). Zidovudine can also be converted to 3-amino-3-deoxythymidine due to the azide group being reduced (Veal et al, 1995); 3-amino-3-deoxythymidine can affect the action of zidovudine against HIV and is possibly toxic (Burton et al, 2006). Lipinskis Rules For Orally Active Drugs According to Clarkes Analysis Of Drugs And Poisons (n.d.) the Log P value of Zidovudine is 0.05 and the molecular weight is 267.25 as calculated on ISIS ChemDraw (Cambridge Soft, n.d.). Zidovudine has a total of two hydrogen bond donor sites and a total of nine hydrogen bond acceptor sites (Lipinski et al, 1997). As a result, zidovudine follows Lipinskis Rules of Five as it has a molecular weight of less than 500, a Log P value of less than 5, there are less than five hydrogen bond donor sites and there are less than ten hydrogen bond acceptor sites (Lipinski et al, 1997). As the Log P value of zidovudine is 0.05 (Clarkes Analysis Of Drugs And Poisons, n.d.) it can be seen that the drug is slightly polar. Zidovudine contains aromatic and large aliphatic regions which are hydrophobic; the polar character arises from the hydroxyl group, an amide region, an ether link and azide group, which are all hydrophilic regions. Therefore as there is a slight imbalance of more hydrophilic groups to hydrophobic groups, zidovudine is slightly hydrophilic and slightly polar and therefore is water soluble and has less affinity to cross the lipid membranes (Bichenkova, 2010). pKa and Ionization State At pH 2, 7.4 and 10 and Solubility According to the International Agency for Research on Cancer (n.d.), the pKa value of Zidovudine is 9.68 and hence it is weakly acidic. Using the equation for the percentage of ionization, which has been derived from the Henderson-Hasselbalch equation, I am able to calculate the percentage amount of ionization of zidovudine at various pH values. The equation used consists of: % ionization of an acid = 100/ 1 + antilog(pKa pH) (Freeman, 2010). At pH2, the equation will read % ionization = 100/ 1 + antilog (9.68 2). This gives the value 2.0910^-6 %. Hence it can be seen that in the stomach only a very small amount of zidovudine will be ionized and generally it will be largely unionized. The percentage of zidovudine unionized at pH2 is 99.99% and hence as zidovudine is highly unionized at pH 2, it will be absorbed from the stomach. At pH2 2.0910^-6% of zidovudine is ionized as the azide group can be protonated (Chemicalize, n.d.). At pH 7.4 the calculation gives a value of 0.52%. Hence in the blood stream zidovudine will be largely unionized as the percentage of zidovudine that is unionized in the blood stream is 99.8%. In the bloodstream 0.52% of Zidovudine will be ionized as the azide group can deprotonate (Chemicalize, n.d.). As zidovudine is largely unionized at pH 7.4, it can be absorbed from the bloodstream into the CD4 cells where it carries out its role as an antiretroviral (Foye et al, 2008). At pH 10 a value of 67.63% is obtained. Therefore in basic conditions, zidovudine is largelyà ionized as the azide group is deprotonated and the amide group of thymine is deprotonated (Chemicalize, n.d.). The percentage of zidovudine unionized in the blood is 32.37%. Zidovudine is absorbed very quickly in the body (Burton et al, 2006) and this can be seen through the fact that zidovudine is greatly unionised in the stomach and blood stream and hence can quickly enter the CD4 cells in the blood (Foye et al, 2008). Conclusion As zidovudine has an azide group it is able to stop HIV replication (Foye, 2008). Zidovudine follows Lipinskis Rules and hence is well absorbed in the body (Lipinski et al, 1997). As zidovudine has a pKa of 9.68, the drug can be absorbed from the stomach as it will be largely unionised in the stomach. This is also the case for the drug in the bloodstream and hence zidovudine can be taken up quickly by the cells and carry out its role as an antiretroviral despite being slightly polar. The bioavailability of zidovdine is limited however by the fact that some zidovudine is glucuronidated and hence is lost; some zidovudine is also affected by the azide group being reduced as the product formed can affect zidovudines role as an antiretroviral and could be toxic (Burton et al, 2006). As zidovudine degrades in the presence of light, the drug is packaged in blister packs or plastic bottles and all formulations of the drug need to be kept out of light and in the packaging they came in (Electr onic Medicines Compendium, n.d.).
Sunday, August 4, 2019
Just :: essays research papers
At the beginning of this semester, we looked at liberty, privacy and freedom of speech. I found this section quite interesting, especially since unlike first semester it applied directly to my life. Freedom of speech was a particularly interesting topic to me, because I couldn't work out my opinion on it. When I thought about the issue in purely philosophical terms, I thought that there should be unrestricted freedom of speech and that censorship should be kept to a minimum. But when I thought about the issue in relation to the real world, I wasn't so sure. This is one of the frustrating things about philosophy - what appears to be philosophically sound in my mind turns out quite differently when applied to the real world. I think it is in finding a balance that the real difficulty lies. Throughout the course of the first essay, I found myself arguing views that I hadn't thought I believed in - and even now I'm not sure if I do. I think sometimes what works philosophically still can 't apply to the real world for considerations that shouldn't have to have a bearing on the issue but do anyway. In the issue of freedom of speech, I found that philosophically hate-speech doesn't cause any significant harm. But when I think about it in the context of the outside world, I firmly believe that it does. This discrepancy is confusing to me. The unit we studied on eyewitness evidence I found to be rather dry - I couldn't really relate to a whole lot of legal stuff. When it was put in the context of the real-life rape victim I found it much more accessible. The essay topic that I chose seemed again rather dull, although it raised interesting side-issues, like the nature of our society. I tried to think why science was regarded as the best way we have to gain knowledge, and came up with a rather depressing view of society - that it was matter oriented, money oriented, concerned with facts and figures, things that were able to be thought of in terms of quantities. And that we tended to ignore the abstract, the indefinable, the unexplainable. This is why I find philosophy occasionally depressing - it forces me to look at the world in which I live, and not like what I see. And yet it is simultaneously liberating because I can see that through studying philosophy, I can look at those other aspects and move beyond what society thinks.
Science in Not Going Too Far Essay -- Scientific Argumentative Persuas
When asked the question of whether or not scientific knowledge should be boundless, I can't help, but to wonder why it wouldn't be. Everything that I can think of that has to do with science such as coming up with cures for diseases, being able to re-create a human being and its parts. Being able to choose whether or not your child will be a boy or a girl, have blonde or brown hair or blue eyes or green eyes is, as far as I'm concerned, extremely beneficial. I don't see anything wrong with cloning either. What's the big deal anyway, it's not like you are going to have a bunch of look-a-likes running around. It is going to cost way too much money to get someone or something cloned. I have to throw in an argument from the other side and Mary Shelly said it in her novel, Frankenstein, "If the study to which you apply yourself has a tendency to weaken your affections, and to destroy your taste for those simple pleasures in which no alloy can possibly mix, then that study is certainly unlawful, that is to say, not befitting the human mind." (233) How could she say the study doesn't benefit the mind? We've always said that we learn from our mistakes haven't we? If the wrong person should somehow receive or get a hold of the technology and scientific methods to cloning, then it could definitely be a dangerous thing not benefiting. They could somehow regenerate all of the world's most evil creatures if he or she wanted a world of anarchy. They could single handedly become ruler of the earth. Of course, it would take a long time for those clones to grow up and become adults capable of creating such putrid crime. But, until then I think that all cloning is doing is making us more aware of how the human body works and that is only go... ... I think life is full of trading. You have to give up some things before you can learn more. So, all those animals and things that we test on are very respectable things to me. Science is the only reason that I am here today as a matter of fact. I actually died and then they had to do a C-Section in order for me to live. The only reason they were able to keep me alive is because through scientific experimentation they were able to learn and save more people. So science is all around us, we just don't notice it so don't hold it back. Works Cited Bishop, J. Michael. "Enemies of Promise." The Presence of Others. Editors Andrea A. Lunnsford and John J. Ruszkiewicz. New York. Bedford St. Martin's, 2000, 237-242. Shelly, Mary. "Frankenstein." The Presence of Others. Editors Andrea A. Lunnsford and John J. Ruszkiewicz. New York. Bedford St. Martin's, 2000, 233.
Saturday, August 3, 2019
Class Difference in the Renaissance and in Shakespeares As You Like It
Class Difference in the Renaissance and As You Like It à à à à à à à Notions about class distinctions during the Renaissance became more ambiguous than at any other period of time. "Many countries moved from a feudal to a capitalist economy, leading to some of the worst peasants' revolts in the history of Europe."(Aston) During the last quarter of the 1500's the conditions for social status and position were going through radical changes, as "the boundaries between the upper elite and the gentry as well as those between these groups and the wealthier professional classes below them were particularly ambiguous." (Bailey) à There came about a term called sorts, which essentially split the population into two roughly defined classes.à There were the better sorts, which included the noblemen, gentlemen, and yeomen. The meaner sorts included the husbandmen, artisans, and laborers. The citizens or merchants could go into either category depending upon income, rank in society, local reputation, profession, and age. Citizens rose in the ranks due to an economic boom in "national trading, service industries, manufacturing businesses, and government posts." (Bailey) The laboring classes saw an increased number of skilled workers and the availability of printed literature provided educational advances. The traditional gauges of status such as "birth, wealth, occupation, political allegiance, and life style, as well as regional, religious, and professional affiliation," (Bailey) were beginning to fade. à To maintain some order, Queen Elizabeth declared a clothing proclamation in 1562. In summary, apparel was one of the primary means through which royalty and the upper class could proclaim their authority and power. One coul... ...the heir of property and money. Our own ways of judging people and situations is deeply rooted in the social changes that took place in the English Renaissance. à WORKS CITED Aston, Margaret. The Panorama of the Renaissance. New York: Abradale Press, 2000. Bailey, Amanda. "Monstrous Manner: Style and the Early Modern Theatre" Criticism , Vol. 43, Issue III 2001. The Oxford English Dictionary. 2nd ed. CD-ROM, Oxford: Oxford UP, 1992. Ronk, Martha Clare. "Locating the Visual in As You Like It," The Shakespeare Quarterly Vol. 52, Issue II, 2001. Shakespeare, William. " As You Like It." The Oxford Shakespeare The Complete Works.à Ed. Stanley Wells, Gary Taylor, and William Montgomery, Oxford: Oxford UP, 1999. Wall, Wendy. "Why Does Puck Sweep?: Fairylore, MerryWives, & Social Struggle," The Shakespeare Quarterly Vol. 52. Issue I 2001. Ã
Friday, August 2, 2019
An African American Fight for Respect Essay
For thousands of years women have been fighting for many things, one of the most important being respect. Some people may think respect for a woman is simply holding the door for her as she walks through, pulling her chair out for her before she is seated, or maybe just standing when she leaves the table; but respect is so much more than that. Respect is a feeling of deep admiration for someone elicited by their abilities, qualities, or achievements. Respect is a feeling that cannot just be given to someone, it is a feeling that must be earned, fought for, or rewarded. For the African American woman, respect did not come by so easily no matter how hard they fought or even if they earned it. Examples of the African American woman fighting for her respect, has once upon a time been one of the many themes during all literary periods. The two works that I chose have the similar theme of respect. The literary pieces are ââ¬Å"Sweatâ⬠by Zora Neale Hurston and ââ¬Å"The Color Purpleâ⬠by Alice Walker. These two works show the same theme of respect for black women and the struggle for it from men. Though both stories have comparisons that could go on for days, they just as well have their differences by the way the handle the theme of respect. Alice Walker has been writing stories and poetry for many years. As a graduate of Spelman College she was given great opportunities and was given a solid education. Womenââ¬â¢s rights and respect has always been two topics close to Aliceââ¬â¢s heart. It has been said, that ââ¬Å"Alice Walker expresses the struggles of black people, particularly women, and their lives in a racist, sexist, and violent society. â⬠Her writings also lean more towards the roles of black women through culture and history. On March 3, 2008 Alice Walker was arrested on International Womenââ¬â¢s Day for crossing the police line at a rally in front of The White House. Walker has set a standard and has never had any need or want to change it. Of the many stories that Alice Walker has written, the one that stands out the most to me dealing with the female struggle for respect is the story made movie and musical, ââ¬Å"The Color Purple. â⬠ââ¬Å"The Color Purple,â⬠is a story written in 1982 that has won multiple awards and recognitions for its not so classy taste and realistic views. Some of these awards being from the Blue Ribbon Awards, Black Movie Awards, Golden Globe Awards, eleven nominations during the Oscars, and plenty more. The main characters in ââ¬Å"The Color Purple,â⬠are Celie Harris Johnson and Mister Albert Johnson. Celie has been abused since she was just a young girl; she had two children by her father Leonard and she is forced to marry Albert, a young widower, by the age of fourteen. During her years of being married to Albert, she is taunted, disrespected, beaten, and abused up until she turns her life around when she meets Shug Avery, a well-known Jazz singer, who comes to live with the couple. Shug takes it upon herself to help Celie raise her self-confidence so she can not only stand up to her husband and demand respect, but to feel beautiful about herself inside and out. By the end of the story, Celie stands up to Avery and is finally reconnected with the family that was once taken away from her. Another great black female author who proudly carries the theme of respect in her stories is Zora Neale Hurston. Hurston, a graduate of Howard University, was a well-known author during the Harlem Renaissance. Hurston is most known for her famous literary piece entitled, ââ¬Å"Their Eyes Were Watching Godâ⬠which caught the eyes of readers around the world. Like Alice Walker, Zora Neale Hurston has also won multiple awards for her fabulous novels, short stories, and poems. The story ââ¬Å"Sweatâ⬠written by Zora Neale Hurston takes place in a small all black town located near Orlando, Florida. This story, like many others with disrespect towards the wife, starts off with husband Sykes taunting his wife Delia by tricking her into thinking that the whip he throws over her shoulders is a snake, knowing she is deadly terrified of them. Throughout the story, Delia deals with infidelity, abuse, rumors, and taunting from her husband. Towards the end of the story, her husband buys a rattlesnake and refuses to take it back where he found it from, knowing his wife is terrified. In the end, that very snake gets loose, bites, and kills him; Delia stands their watching him die. The website articlemyriad. com states ââ¬Å"The reader can speculate on whether or not Delia was too afraid to move to get help for her husband, but it is the general consensus that she purposefully let him die. While you could argue both, if you are going to contend that she was just afraid, youââ¬â¢d better take a closer look at the text before trying to defend your point. â⬠One of the greatest comparisons in this story is the lack of respect the husbands have for their wives, a marriage is supposed to be filled with trust, respect, love, and honesty, all of which the two marriages in ââ¬Å"The Color Purpleâ⬠and ââ¬Å"Sweatâ⬠lacked. Although there are many comparisons, there were also contrasts in the two stories, although not exactly easy to find with a closed mind. A contrast in these two stories to me that stood out the most were the personalities of the two wives in the stories. In ââ¬Å"The Color Purple,â⬠Celie is abused and taken advantage of, but holds a quiet tongue until the end; Delia in ââ¬Å"Sweatâ⬠is abused and taken advantage of , but she always speaks her mind and portrays her true feelings towards something. With these two stories I felt it was good to have the personalities of the women who wanted respect to be completely different so that I could compare and contrast just a bit more clearly. One was more hidden and kept feelings to herself, the other more outgoing and stronger like all women should be. In conclusion, respect for women, especially blacks, has been a subject that will always be discussed and fought for. Zora Neale Hurston and Alice Walker described the struggle for respect in many similar and different ways. I stated earlier that for thousands of years women have been fighting for many things, one of the most important being respect and that respect was a feeling that cannot just be given to someone, it is a feeling that must be earned, fought for, or rewarded. I am proud of the long way that not only African American women have come, but women all race and I am blessed to have such profound women to look up to. Women in the past who have fought for our rights set a high standard for the rest of us to follow and I look forward to doing just so. Works Cited 1. The Norton Anthology of African American Literature: Second Edition Henry Louis Gates Jr. & Nellie Y. McKay.
Thursday, August 1, 2019
BUGusa Inc. & WIRETIME Inc. Scenarios Essay
BUGusa Inc. is based in any state USA. The company provides critical software technology that allows eaves dropping, sound collection and more to law enforcement agencies throughout the states and federal government within the United States of America. BUGusa Inc. is looking to expand its services, expertise and software at an international level. In the course of their operations there have been some questionable behaviors concerning internal and external factors that are affecting the flow of operations and in some cases, this behavior may cause serious issues with the integrity of the software and its security. WIRETIME Inc. is a fairly new company competing against BUGusa Inc. That seeks to gain information on BUGusa Inc. by infiltrating its workforce and recruiting its best and brightest. Throughout this paper I will address some of those case scenarios and do my best to answer the questions set forth by the assignment. 1st Scenario: Has WIRETIME Inc. committed any torts? BUGusa Inc. vs. WIRETIME Inc. In this case scenario we find that WIRETIME Inc. has made an intentional negative public statement against BUGusa Inc, and more specifically against its product reliability. This behavior by WIRETIME Inc. can be seen as a gross move against BUGusa Inc. reputation, thus causing distrust in their products and services from the general public, state and federal agencies home and abroad. The behavior demonstrated by WIRETIME Inc. while not uncommon in the business world, can be seen as a defamation or libel tort, and this can give BUGusa Inc. leverage against WIRETIME Inc. in a lawsuit. BUGusa Inc. may sue for any marketing related costs it will incur to help its image rise to new and higher levels of trust within its current customers and future customers nationally and internationally; it wouldnââ¬â¢tà be a surprise if they also try to collect from possible damages it may have incurred from actual or potential loss of profit stemming from the ad circulated by WIRETIME Inc. and the distrust it may have already or potentially cause in the future against BUGusa Inc. WIRETIME Inc. could make the argument that its intention was not to harm BUGusa Inc. reputation because their statements were opinion based and not objective facts. In order to rebuttal the argument by WIRETIME Inc., and to build new trust, BUGusa Inc. could demonstrate that its products and services work well beyond the one-month capabilities that WIRETIME Inc. suggested on its supposedly opinion ad. By demonstrating that their software and services work beyond the one- month mark, they can surely h old their ground against their competitor and possibly create new business and stronger relationships with its consumers, and, at the same time win the lawsuit against WIRETIME Inc. 2nd Scenario: Has WIRETIME Inc. committed any torts? Janet, head of the R&D department at BUGusa Inc. has two more years in her contract with her current company. She has been offered a much lucrative opportunity to work for the competition (WIRETIME Inc.) But there is a provision in her current contract that prohibits her to work for the competition for the following two years of her contract even if she was fired before that time expires. This is called the non ââ¬â compete clause. Janet disclosed this information (non ââ¬â compete clause) to the head of human resources at WIRETIME Inc. when he or she offered Janet employment with their company. You would think that this information would deter any further headhunting approach from WIRETIME Inc. because of the consequences Janetââ¬â¢s breach of duty to BUGusa Inc. may cause her if she accepts and the liability WIRETIME Inc. picks up by performing this intervening event against the non ââ¬â compete clause BUGusa Inc. has on Janetââ¬â¢s contract. After Janet exposed the non ââ¬â compete clause, the head of human resources at WIRETIME Inc. persisted and offered to increase her pay by 10% and added a $5,000.00 signing bonus to the deal. Janet had a duty to BUGusa Inc. and she committed a breach of contract by accepting the offer from the competing company by evidence of acceptance. There was an offer, acceptance, consideration,à consent, capacity, legal purpose, and writing. While it was illegal to work for the competitor, it was not illegal for her to resign from BUGusa Inc. WIRETIME, clearly intended to have Janet violate her legal agreement and contractual restriction with BUGusa Inc. and committed the tort of interference in a contractual relationship between Janet and BUGusa Inc. 3rd Scenario: WIRETIME Inc. (Steve & Walter) Discuss BUGusa Inc. Liability for Waltersââ¬â¢s actions. WIRETIME Inc. has made it its main mission to infiltrate its competitor and retrieve high value information from BUGusa Inc. by all means necessary. WIRETIME Inc. sends one of its employees, (STEVE) to apply for a position at BUGusa. Such is their luck that Steve, not only gets hired, but he secures a position within BUGusa Inc. research and development department. BUGusa Inc. failed to realize that Steve was an employee at WIRETIME Inc. thus placing the companiesââ¬â¢ sensitive information at risk. While at BUGusa, Steve was picked up by an attentive security guard (Walter) who found out through the grapevine and investigation, that Steve was a spy amongst them working for the competitor. Walter decided to approach Steve and take him in to a soundproof room, and retrieve the truth from Steve through intimidating threats against his physical safety for six hours. Steve, of course fearing for his physical well being, disclosed his purpose in the company what information he has passed along and whom he truly worked for. While Waltersââ¬â¢s frustration with Steve is understandable, his handling of the situation is totally unacceptable and carries some penalties with it. Walter created an atmosphere of stress, mentally and physically against an employee, regardless of his true intentions; BUGusa Inc. should of done its homework through background checks against Steve and probably saved itself the headache. Nevertheless, Waltersââ¬â¢s behavior was thuggish and criminal thus creating the tort of assault. Walter could have held Steve and called the police, then followed through with charges against Steve and WIRETIME Inc. but his course of action may result in Steve goi ng after BUGusa Inc through vicarious liability. This liability holds BUGusa Inc. as responsible for Waltersââ¬â¢s behavior and actions while performing his normal duties in the workplace. 4th Scenario: Parking lot of BUGusa Inc. Crime problem. What defense if any, may be available to BUGusa Inc.? As with all working environments, it is the legal and implied duty of any employer to provide a healthy and safe work environment for its employees, vendors and any other patrons visiting or performing work at any job site within the United States of America. Here we can see that this particular BUGusa Inc. branch that is located in Shady town USA, has been the victim of multiple attacks on its employees and its vendors and also fell pray to vandalism. This problematic issue is well known to the residents of the community where BUGusa has its building; this leads me to know that management at BUGusa Inc. must have also been aware of this problem and failed to address it properly. I do not see any available defense for BUGusa Inc. on the matter of the vendor being attacked and robbed while waiting to deliver goods at the facility mentioned above. BUGusa has a duty to its employees, vendors and any patron performing any job within its premises to provide adequate safety measures that w ill deter thiefââ¬â¢s from braking in to cars and vandalizing company property, but most importantly from harming the people within its property at all times. Having a well lit parking lot means all lights are working properly and to their full capacity, and in this case, they had a few lights that were not operating at all. Also, well-lit areas are not enough security against a hostile environment that has in the past proven to be dangerous against employees and vendors. The company breached its duty by not upgrading its security measures after the first reported assaults against its employees, this negligence caused that the vendor become another victim of the crime wave affecting its private property. The injury to the employees and vendor are financial, mental and may well be physical if not yet. The tort that applies here is negligence on the part of BUGusa Inc. If they would have reevaluated their security stance against the rise in crime and violence on their property and its surrounding community, it could have avoided such negligence. 5th Scenario: Randy and Brian (BUGusa Inc.) What defense may be available to BUGusa Inc.? The following Scenario holds two parties as responsible for failing to perform their required duties as responsible citizens and employees. By both parties being negligent, they are both are potentially at fault; they violated personal and business duty, breached their duties to their safety and business safety, causing an accident and damages to private and business property not to mention the physical injuries if any, and obvious financial injuries to personal and business property. Both Randy and Brian were negligent in their actions, Brian, as an employee of BUGusa Inc. could have avoided the crash if he were following the speed limit or driving in accordance with road and area conditions. Randy failed to obey the yield sign and assumed the risk of being impacted by another vehicle. Here we can apply comparative or contributory negligence because they were both at fault, if BUGusa Inc. can prove that Randy had more to do with the cause of the accident then they may well win the c ase. 6th Scenario: Sally may have a successful case against BUGusa Inc. for what Tort? Just as in the actual case of General Motors, BUGusa Inc. failed to notify the consumers of the potential hazards of using their products. BUGusa tried to save money at the risk of consumerââ¬â¢s safety by taking shortcuts in the manufacturing and assembly process, knowing that such shortcuts may result in short circuit and in some cases harm to its product users they moved forward with its sale and fielding. Strict Product Liability Tort states that the manufacturer, distributor and seller are responsible for any harm and or injury caused by failure to inform of manufacturing defects or design defects. By designing the product without the necessary insulation, Sally was exposed to a short and suffered injuries. BUGusa Inc. is clearly in hot water and can be liable for all harm and injuries stemming from this negligent act. References Cornell University. (2014). Tort. Retrieved from http://www.law.cornell.edu/wex/tort Expert Law. (2014). Negligence / Personal Injury. Retrieved from http://www.expertlaw.com/library/personal_injury/negligence.html Hill, M. (2011). The Legal Environment of Business. A Managerial Approach: Theory to Practice. Phoenix, AZ: Copyright à © McGraw-Hill Company.
Subscribe to:
Posts (Atom)